’08 Suzuki SX4 Sport – HID Installation (Part 2 of 2)

How-To #1: HID Installation (Part 2 of 2)

Use the information contained here at your own risk. We take no responsibility and will not be held accountable for any of your safety issues, or any problems whatsoever. If you are not so mechanically talented or never popped open a hood before, please do not try this on your own.

Click here for Part 1 of installation.

Section III: Remove and Install Light Bulb

20. This picture is looking at the stock halogen bulb. Bulb is held by the white locking ring, and still connected to stock socket.
21. To remove stock bulb. First by removing the socket. As simple as press on the retainer and pull back.
22. Remove the white locking ring by twist it counter-clockwise. Remove the bulb. Installing the bi-xenon in the reverse order.

Section IV: Wiring Connection

23. Passegner side grounding point is at the power steering reservior bracket.
24. Driver side grounding point is connected to the existing ground at the radiator support.
25. Laying out the supplied relay harness.
26. Connect the relay harness per instruction on the supplied wiring diagram. This is the connection at the positive battery terminal.